• INVISIBLE RINGS

    INVISIBLE RINGS

    Fantastic solution for small beads.

  • interchangeable pendants stainless steel

    INTERCHANGEABLE PENDANTS

    Stainless steel parts bead pins
    between 6mm-70mm.

  • Lampwork cabochon tools

    CABOCHON MANDREL

    Quadrat, rectangle, triangle, heart shape

  • Stainless steel adjustable ring, hand polished for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 17 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 5 mm wide. The M2.5 screw is 4mm long 10% DISCOUNT FROM 10 PIECES! 20% DISCOUNT FROM 20...

    10,00 €
    In Stock
  • Fiona leather bracelet for lampwork beads - black Without bead! If you would like to buy with bead (+30 EUR), please contact us! You can change the bead and the bead pin too. The bead pin goes through two metal beads. These metal beads have 6mm diameter. Please add this 2x6mm to your necessary bead pin length if you choose a new bead pin. You will receive...

    38,00 €
    In Stock
  • Interchangeable pendant for 4 lampwork beads. The longest snake chain of the pendant is 10cm. The shortest snake chain about 4cm. Your beads must have minimum 3 mm hole. The stainless steel snake chain of the pendant has 1.6mm diameter. The stainless steel beads on the pendant have 6mm diameter. Pendant clasp hole size is 3mm. SUGGESTION: Screw the parts...

    15,00 €
    In Stock
  • Gabi stainless steel mesh necklace for glass beads 5 mm stainless steel mesh necklace This necklace have 3 parts. The middle part can be used for beads. This part is reused. You will received 3 reusable middle parts. PLEASE HOLD THE END OF MIDDLE PART WITH PLIERS IF YOU SCREW THE CUBE PART! Open the balls on the end of the mesh and change the middle...

    50,00 €
    In Stock
  • Beadpin (not curved) with 2 screw nuts for invisible ring. thread size ist M1.1 PLEASE SELECT THE LENGTH OF THE BEAD PIN! You need a ring pliers to curve the beadpin! If you need other bead pin size, please buy the bead pin here: CLICK and screw nuts here: CLICK! Video tutorial Video tutorial PDF tutorial

    3,00 €
    In Stock
  • 20 pieces 6mm screw nut for "Invisible Rings". thread size: M1.1 (Invisible Ring have 1.1mm thread, no M2.5 thread!!!!) 10 pieces 6mm long beadpin for invisible ring tool. This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool. Size: 6mmx2mm. Thread 1.1mm, beadpin 6mm long Material: surgical steel WITHOUT...

    14,00 €
    In Stock
  • 1 pairs "Invisible Oval Earrings" with 2 screw nuts. Interchangeable steel earring. thread size: M1.1 Invisible Ring has M1.1mm thread, no M2.5 thread! This this earrings you can use the beads of "invisible rings". You just need screw the beads on the beadpin.. WITHOUT GLASS BEADS! To hold a screw nuts in a flame you need pin holder tool and 6mm bead...

    8,00 €
    In Stock
  • Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm.  thread size: M1.1 You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...

    5,00 €
    In Stock
  • 1 pieces surgical steel interchangeable pendant. The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm.   thread size: M1.1 You will receive 1 pieces change pendant clasp: 1 bead clasp (size M) 1 bead pin (30 mm - 38 mm) 1 ball end bead...

    5,50 €
    In Stock
  • Beadcap made of 0.8mm surgical steel, stainless steel.  2 pieces in the same size. Dimension: lenght 30 mm  outside diameter: 10 mm x 5mm WITHOUT GLASS AND NECKLACE! From 10 pieces you get 10% discount!From 20 pieces you get 20% discount! Tutorial video   PDF Tutorial

    5,50 €
    In Stock
  • Double interchangeable pendant for 2 glass cabochons. thread size: M2.5 You can use it with 2 ringtops. Pendant is compatible sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc. price includes: 2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x 18 mm beadpin 1 x...

    17,00 €
    In Stock
  • Leather black necklace with Beach Buggy bead pins. thread size: M1.1 This necklace has 2 leather parts connected with 6mm beach buggy bead pin. This bead pin is installed with ball end bead with 2mm hole. You can install all beach buggy bead pin with this ball. Necklace will be delivered with 28mm bead pin. Necklace length 45 or 50 cm. Leather made in...

    42,00 €
    In Stock
  • Cornelia stainless steel necklace with interchangeable bead pin - thread size: M1.1 The cylinder part of the necklace has 3mm diameter. You can use this necklace with beads over 3mm mandrel without changing of beadpin. For beads under 3mm mandrel you need fit the beadpin to your beads. Necklace length: 60 cm or 80 cm PLEASE USE PLIER ON PARTS!WITHOUT...

    25,00 €
    In Stock
  • Leather black necklace with M2.5 cabochon pendant. This necklace has 2 leather parts connected with 6mm beach buggy bead pin. This bead pin is installed with ball end bead with 2mm hole. You can install all beach buggy bead pin with this ball. Necklace will be delivered with interchangeable pendant. You can use this pendant with ringtops. The pendant is...

    47,00 €
    In Stock
  • Leather bracelet with Beach Buggy chunks for lampwork cabochons. Handsewn, double layered leather. Edges are hand colored. Our chunks are compatible with all original noosa products.  Material: leather made in Spain, plated copper. Comes in two sizes: 3.5 cm x 21.5 cm, lenght can be set to 18 or 20 cm 3.5 cm x 22.5 cm, lenght can be set to 19 or 21 cm...

    20,00 €
    In Stock
  • 1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel From 50 pieces 10% discount! WITHOUT PIN HOLDER TOOL...

    0,50 €
    In Stock
  • 1 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.

    0,70 €
    In Stock
  • 1 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too. From 50 pieces we offer 10% discount!From 100 pieces we offer 20% discount!

    0,80 €
    In Stock
  • Beach Buggy Surgical steel interchangeable jewelry system thread size: M2.5 Dorry interchangeable pendant -short-with M2.5 screw Hole size: Ø 3.5mm. Balll Ø 6mm. M2.5 screw is 5mm long WITHOUT GLASS AND NECKLACE!  Anleitung PDF

    5,50 €
    In Stock
  • Pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5).You can screw maximal 4 beadpins into the disc. You can use it with ringtops.This item is compatible with Sunset Blvd jewelry items. price includes: 1 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x endbead with 3.5mm hole WITHOUT NECKLACE AND...

    10,00 €
    In Stock
  • 1 piece "Invisible Rings" with 2 screws.  thread size: M1.1 The rings are made of  Beach Buggy bead pin. To hold a screw in a flame you need a pin holder tool and 6mm bead pins. You can addjust a the ring. Please press it gently. The ring shape can be refine by ring pliers. PLEASE WATCH BOTH VIDEOS! Video Tutorial Video tutorial PDF tutorial ATTENTION:...

    4,00 €
    In Stock
  • Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm.  thread size: M1.1 You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...

    4,00 €
    In Stock
  • 1 pieces steel M2.5 screw 8 mm long. thread size: M2.5Length: 8mm, head diameter 3.5mm You should hold the the head with pliers until screw. From 50 pieces we offer 10% discount!From 100 pieces we offer 20% discount!

    0,80 €
    In Stock
  • Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm.  thread size: M1.1 You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...

    3,00 €
    In Stock
  • Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. thread size: M1.1 The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm.  You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...

    5,00 €
    In Stock