1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.
thread size: M2.5
Discount:
From 2 bags 5.00 EUR / bag, please login to see the discount price.From 10 bags 4.00 EUR/bag, please login to see the discount price.
Length: 4mm, you can find in my shop 6mm long too.
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops.
thread size: M2.5
DISCOUNT price:
From 2 bags 5.00 EUR / bag, please login to see the discount price.
From 10 bags 4.00 EUR / bag, please login to see the discount price.
Length: 4mm, you can find in my shop 6mm long too.
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Discount prices:
From 2 bags 6.00 EUR/bag, please login to see the discount price.From 10 bags 5.00 EUR/bag, please login to see the discount price.
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass.
Invisible Ring has M1.1mm thread, no M2.5 thread!
This screw is fit with all bead pin of Beach Buggy.
To hold a screw in a flame you need pin holder tool and 6mm bead pins.
Size: 6mmx2mm. Thread 1.1mm
Material: surgical steel
WITHOUT PIN HOLDER TOOL AND BEADPIN!
I SUGGEST TO GLUE...
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Discount:
From 2 bags 6.00 EUR / bag, please login to see the discount price.From 10 bags 5.00 EUR / bag, please login to see the discount price.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
1 piece Cecile pendant for one bead.
I suggest to use with max. 15 mm beads.
The "C" shape is 20x27mm.
The clasp can be used with max 3mm thick necklace.
All part made of stainless steel
ONE PENDANT! WITHOUT BEAD!
1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel.
Size: each side is 30mm long, 3mm thickness
Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading.
Buy pendant:...
1 piece M2.5 stainless steel unicorn interchangeable pendant with 78 cm stainless steel ball chain necklace
The snail pendant is 9 mm x 12 mm (without thread).
The M2.5 thread is 4mm long
WITHOUT GLASS BEAD!
video
Stainless steel half- Moon pendant with M2.5 thread without necklace
This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread.
The pendant has a 30 mm diamete and 10mm thickness.
The clasp hole has 5 mm diameter.
ATTENTION: WE CAN SHIP IT THIS ITEM FROM 19 NOVEMBER 2020!
WITHOUT GLASS BEAD!
INTERCHANGEABLE RING FOR SMALL BEADS! Please use it with max. 20-25mm cabochon.
1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside.
The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it).
The ring itself is 6 mm wide. The M2.5...
1 pair of earring hooks for glass jewelry with M2.5 screw, with 18mm bead pins and Dorry end bead.
thread size: M2.5
Other bead pin you can buy here: CLICK
Dimensions: hook: 10 mm x 9 mm bead pin 18mm
WITHOUT GLASS!
WHEN YOU INSTALL THE GLASS ON THE EARRINGS, PLEASE HOLD THE CYLINDER PART NOT THE HOOK!
PDF tutorial
1 pieces wood display with mirror for 4 pieces hairpin or pen.
WITHOUT PENS AND HAIRPINS!
Woodtypes:
maple (middle brown)
Cherry (light brown)
light Cherry (very light brown)
Acacia (little yellow tone)
Size:
Size: 12 cm x 16cm x 9 cm
WE SHIP THIS ITEM ONLY IN EUROPE!
ATTENTION: from 2 pieces we have to charge extra shipping fee!
PLEASE NOTE THAT THE...
FLOWER INTERCHANGEABLE RING FOR SMALL BEADS!
1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside.
1 piece stainless steel flower beadcap, the petals are hand polished. Diamter of the flower is 26mm.
The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it...
Double interchangeable pendant for 2 glass cabochons (thread size is M2.5)
This item can used with two ringtops. Pendant is compatible with sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc.
price includes:
2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long)
1 x 6 mm beadpin
1 x 18 mm...
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.
thread size: M2.5
Discount:
From 2 bags 5.00 EUR / bag, please login to see the discount price.From 10 bags 4.00 EUR/bag, please login to see the discount price.
Length: 4mm, you can find in my shop 6mm long too.
NEW STYLE!
1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside.
The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it).
The ring itself is 6 mm wide. The M2.5 screw is 4mm long. The round plate has 15 mm diameter.
Our items are...
lampwork tool - 1 piece heart steel cabochon plate with M2.5mm cabochon mandrel.
thread size: M2.5
Size: 40mmx40mm, 3mm thickness
Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
1 piece round cabochon pendantand with M2.5 thread without glass cabochon.
Surface is mirror polished.
the pendant has a beautiful laser cutted pattern. This pendant is very light.
The pendant is fit with 7mm cord.
The round stainless steel plate has 50mm diameter
The M2.5 thread is 4mm long
WITHOUT NECKLACE AND GLASS CABOCHON.
Special price until end of...
Stainless steel Moon pendant with M2.5 thread without necklace
This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread.
The pendant has a 30 mm diamete and 10mm thickness.
WITHOUT GLASS BEAD AND NECKLACE!
