Chatherine earring.
Elegant style interchangeable earring jewelry.
The earring has 3 mm long M2.5 thread.
Diameter of the cap is 8 mm.
.Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230431-balloon
Color turquoise: A5 notice book in turquoise color. You can screw M2.5 glass cabochon on the book. Please note that the colors in the original may vary depending on the monitor! Notebook hardcover - PU leather cover 100gsm acid free paper in a bright ivory colour so you can use your favourite pen, pen or marker. 156 Numbered Pages 2 pages table of...
Reference: 230207
1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. Size: each side is 30mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230204
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230426
1 piece M2.5 stainless steel crown interchangeable pendant with 78 cm stainless steel ball chain necklace The crown pendant is 9 mm x 11 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230395
1 piece Ella pendant for two beads with M2.5 thread with 78 cm 1.6mm ball chain necklace. All part made of stainless steel WITHOUT BEAD!
Reference: 230397
1 piece gingko pendant with 80 cm ballchain necklace. All part are made of stainless steel. The gingko without clasp and screw is 35x24mm. WITHOUT BEAD!
Reference: 230391
3 pieces small button shanks with M2.5 thread. The hole size of the loop is 3 mm, the M2.5 thread is 4 mm long.
Reference: 230369
1 piece M2.5 stainless steel hedgehog interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 8mm (without thread and clasp). The M2.5 thread is 4mm long Watch a video about the welding of hedgehog pendant: CLICK! WITHOUT GLASS BEAD! video
Reference: 230356
Stainless steel half- Moon pendant with M2.5 thread without necklace This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread. The pendant has a 30 mm diamete and 10mm thickness. The clasp hole has 5 mm diameter. ATTENTION: WE CAN SHIP IT THIS ITEM FROM 19 NOVEMBER 2020! WITHOUT GLASS BEAD!
Reference: 230338
Lola earring. Elegant style interchangeable earring jewelry with weld chain. You can screw one bead and glue one bead on this earring. The earring has 3 mm long M2.5 thread. Diameter of the cap is 8 mm. .Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
Reference: 230432-gold
Gold plated stainless steel oval earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring 17x35mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. ATTENION: WITHOUT...
Reference: 230433
1 pair Vee earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This earring was designed by the great...
Reference: 230440
1 piece M2.5 stainless steel box clip for M2.5 beads (this is an item without glas fox!!!) Size of the staples 65x25mm. Material is stainless steel. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230200
Cabochon mandrel with M2.5mm thread. Mandrel has both ends M2.5 threads. (4mm and 6mm) thread size: M2.5 Mandrel is 20 cm long and it has 5mm diameter. Buy pendant: CLICK! Buy screw nuts 4mm: CLICK! Buy screw nuts 6mm: CLICK! Material: Surgical steel WITHOUT SCREW NUTS!
Reference: 230209
lampwork tool - 1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: each side is 50mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get...
Chatherine earring.
Elegant style interchangeable earring jewelry.
The earring has 3 mm long M2.5 thread.
Diameter of the cap is 8 mm.
.Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
