
Reference: 230000-4mm
10 x M2.5 steel screw nut 4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Interchangeable jewelry pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5).
This pendant is made of surgical stainless steel. It is hand polished.
I suggest to use with glass cabochon with 30-45 mm diameter.
Hole size: 5mm
Pendant size: 5mm x 20 mm
The M2.5 thread is 4mm long.
Without glass and necklace!
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230012-B
Beadcap made of 0.8mm surgical steel, stainless steel. 2 pieces in the same size. Dimension: lenght 30 mm outside diameter: 10 mm x 5mm WITHOUT GLASS AND NECKLACE! From 10 pieces you get 10% discount!From 20 pieces you get 20% discount! Tutorial video PDF Tutorial
Reference: 230426
1 piece M2.5 stainless steel crown interchangeable pendant with 78 cm stainless steel ball chain necklace The crown pendant is 9 mm x 11 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230346
1 piece M2.5 stainless steel mojo interchangeable pendant with 78cm stainless steel ball chain necklace The mojo pendant is 15mm x 12mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230335
1 piece dream catcher cabochon pendant and with M2.5 thread without glass bead the pendant has a beautiful laser cuted pattern. The round part has 35 mm, the leafs are 20mm long. Hand mirror polished This pendant is very light. The pendant is fit with 3mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long VIDEO: CLICK HERE!
Reference: 230360
1 piece M2.5 stainless steel unicorn interchangeable pendant with 78 cm stainless steel ball chain necklace The unicorn pendant is 9 mm x 12 mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230292-acacia
1 pieces wood display with mirror for 4 pieces hairpin or pen. WITHOUT PENS AND HAIRPINS! Woodtypes: maple (middle brown) Cherry (light brown) light Cherry (very light brown) Acacia (little yellow tone) Size: Size: 12 cm x 16cm x 9 cm WE SHIP THIS ITEM ONLY IN EUROPE! ATTENTION: from 2 pieces we have to charge extra shipping fee! PLEASE NOTE THAT THE...
Reference: 230008-40
Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm. thread size: M1.1 You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...
Reference: 230215-80
Belly stainless steel necklace for 2 beads thread size: M1.1 ATTENTION: This model was changed on 5. May 2018. This necklace do not have a clasp. You can move up and down the middle oval stainless steel beads. For bead with 3mm hole. Snake chain have 1.6 diameter. PLEASE USE PLIER ON PARTS! WITHOUT GLASS BEAD!
Reference: 230283-p1
4 pieces unique wooden pens (walnut with marble effect) with M2.5 thread, blue pen refill, and black velvet bag. You will buy exactly the 5 pens on the photo. REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass...
Reference: 230272-5gold
5 pieces Dorry 6 mm hole pendant with M2.5 thread made of gold plated stainless steel This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY BLOWPIPE HERE: CLICK! video tutorial PDF tutorial
Reference: 230332-45cm
1 peices Annabelle necklace with 3 interchangeable pendant types The material of the necklace is silicone. You will receive these pendants with the necklace: Horizontal bead pendant (20mm) Vertical bead pendant (26mm) Cabochon pendant with M2.5 thread The beadpendants are closed with screw end beads. Please screw them with pliers or glue them. WITHOUT...
Reference: 230242
1 piece surgical steel Twist pendant with 2 screws!. thread size: M1.1 You can use the beads as with invisible rings. You can adjust the pendant with hand. Pendant will be delivered with 2 screws, what you can melt into your glass beads. WITHOUT BEADS! I SUGGEST TO GLUE THE FINISHED BEADS! PLEASE WATCH BOTH VIDEOS! Video Tutorial Video tutorial PDF...
Reference: 230420-80cm
Judit necklace - the place of the beads is adjustable The necklace has two stainless steel beads. One is a join-bead that joins the chain and one end-bead that holds your glass bead.You can slide the join-bead up and down the chain to adjust the spacing for the glass bead.The end-bead is a bayonet clasp. Gently press the bead and turn to the right to...
Reference: 230431-kitty
Color turquoise: A5 notice book in turquoise color. You can screw M2.5 glass cabochon on the book. Please note that the colors in the original may vary depending on the monitor! Notebook hardcover - PU leather cover 100gsm acid free paper in a bright ivory colour so you can use your favourite pen, pen or marker. 156 Numbered Pages 2 pages table of...
Reference: 230290-45cm
Stainless steel 3 mm lantern chain necklace Material: surgical stainless steel ATTENTION! Diameter of bayonet clasp is 4mm ! I suggest to use this necklace with following items: Pendant clasp, size L: CLICK cabochon pendant new style: CLICK PLEASE CHOICE THE LENGHT OF THE NECKLACE!
Reference: 230381-coctail
2 pieces cocktail spoon. The M2.5 thread is 4 mm long. The spoon is 20 cm long without thread Material: high polished stainless steel. Without glass bead!
Interchangeable jewelry pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5).
This pendant is made of surgical stainless steel. It is hand polished.
I suggest to use with glass cabochon with 30-45 mm diameter.
Hole size: 5mm
Pendant size: 5mm x 20 mm
The M2.5 thread is 4mm long.
Without glass and necklace!