
Reference: 230000-4mm
10 x M2.5 steel screw nut 4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Color turquoise:
A5 notice book in turquoise color. You can screw M2.5 glass cabochon on the book.
Please note that the colors in the original may vary depending on the monitor!
Data Protection
Delivery
Terms and conditions
Surgical steel interchangeable pendant for double lampwork cabochon
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Video: CLICK HERE!
Reference: 230242-angel
1 piece M2.5 stainless steel pendant with 78cm stainless steel ball chain necklace pendant styles and sizes without thread angel: 13mm x 11mm snowflake: 10mm x 10mm snowman: 10mm x 9mm The M2.5 thread is 4mm long WITHOUT GLASS BEAD! PLEASE CHOICE THE PENDANT STYLE! video
Reference: 230366
1 piece M2.5 stainless steel halloween interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 12mm x 11mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230269-45-no-wires
GABI NECKLACE WITHOUT WIRES! 5 mm stainless steel mesh necklace This necklace have 3 parts. The middle part can be used for beads. You will receive 2 styles of middle part. One can be reopen by cube screw, other style is fix with crimp beads. The set do not include wires. You can extra order them. Open the balls on the end of the mesh and change the...
Reference: 230242
1 piece surgical steel Twist pendant with 2 screws!. thread size: M1.1 You can use the beads as with invisible rings. You can adjust the pendant with hand. Pendant will be delivered with 2 screws, what you can melt into your glass beads. WITHOUT BEADS! I SUGGEST TO GLUE THE FINISHED BEADS! PLEASE WATCH BOTH VIDEOS! Video Tutorial Video tutorial PDF...
Reference: 230008-40
Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm. thread size: M1.1 You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...
Reference: 230271
Zoe pliers Loop forming pliers. Maximum 0.7 mm wire. I SUGGEST TO USE WITH Zoe earrings!
Reference: 230269-45-fix-wires
GABI NECKLACE WITH 5 FIX WIRES! WITHOUT INTERCHANGEABLE WIRES! 5 mm stainless steel mesh necklace This necklace have 3 parts. The middle part can be used for beads. You will receive 2 styles of middle part. One can be reopen by cube screw, other style is fix with crimp beads. The set includes only 5 wires with crimp beads. Open the balls on the end of the...
Reference: 230368
1 piece M2.5 stainless steel flower bunny interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 16mm x 12mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230410-3-fach
Pillbox with mirror for 40 mm glass cabochon, bronze color, without glass decoration. Make a cabochon with 40 mm diameter and glue it with 2 component epoxy glue on the top of the box. Size: 53mmx17mm Glue: CLICKCabochon plate for top: CLICK Please choice type: Box with 1 space Box with 3 spaces
Reference: 230306
Adjustable stainless steel memory wire for 2 small M2.5 glass cabochon. Adjustable between 17-21cm. Oval shape. M2.5 threads are 4mm long. WITHOUT GLASS BEADS!
Reference: 230365
1 piece M2.5 stainless steel duck interchangeable pendant with 78 cm stainless steel ball chain necklace The muiscal note pendant is 6 mm x 13 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230215-80
Belly stainless steel necklace for 2 beads thread size: M1.1 ATTENTION: This model was changed on 5. May 2018. This necklace do not have a clasp. You can move up and down the middle oval stainless steel beads. For bead with 3mm hole. Snake chain have 1.6 diameter. PLEASE USE PLIER ON PARTS! WITHOUT GLASS BEAD!
Reference: 230430
1 piece M2.5 stainless steel dragonfly interchangeable pendant with 78 cm stainless steel ball chain necklace The dragonfly pendant is 25 mm x 30 mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230272-5
5 pieces Dorry 6 mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...
Reference: 230337-5
5 pieces Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...
Color turquoise:
A5 notice book in turquoise color. You can screw M2.5 glass cabochon on the book.
Please note that the colors in the original may vary depending on the monitor!