Moon pendant with M2.5 thread
  • Moon pendant with M2.5 thread
  • Moon pendant with M2.5 thread
  • Moon pendant with M2.5 thread
  • Moon pendant with M2.5 thread

Moon pendant with M2.5 thread

230355

Stainless steel Moon pendant with M2.5 thread without necklace

This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread.

The pendant has a 30 mm diamete and 10mm thickness.

WITHOUT GLASS BEAD AND NECKLACE!

 

Data Protection

 

Delivery

 

Terms and conditions

Description

Luca stainless steel mesh necklace - 3 mm - for glass cabochons with M2.5 screw
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.

Product Details
230355
New product
16 other products in the same category:

Reference: 230200

M2.5 cabochon mandrel

Cabochon mandrel with M2.5mm thread. Mandrel has both ends M2.5 threads. (4mm and 6mm) thread size: M2.5 Mandrel is 20 cm long and it has 5mm diameter. Buy pendant: CLICK! Buy screw nuts 4mm: CLICK! Buy screw nuts 6mm: CLICK! Material: Surgical steel WITHOUT SCREW NUTS!

Reference: 230378-10pcs

10 pieces adjustable steel ring with M2.5 thread - small bead

INTERCHANGEABLE RING FOR SMALL BEADS! Please use it with max. 20-25mm cabochon. 10 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5...

Reference: 230433-3-gold

3 x gold plated M2.5 Vee earring

3 pairs Vee gold plated stainless steel earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This...

Reference: 230440

Box clip M2.5 - huge

1 piece M2.5 stainless steel box clip for  M2.5 beads (this is an item without glas fox!!!) Size of the staples 65x25mm. Material is stainless steel. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video   

Reference: 230438

Milo M2.5 pendant

1 piece Milo pendant for one bead. I suggest to use with max. 15 mm beads. The leaf shape is 23x7mm. The clasp can be used with max 3mm thick necklace. All part made of stainless steel ONE PENDANT! WITHOUT  BEAD!

Reference: 230431-balloon

A5 notebook, turquoise M2.5 - balloon

Color turquoise:  A5 notice book in turquoise color. You can screw M2.5 glass cabochon on the book. Please note that the colors in the original may vary depending on the monitor! Notebook hardcover - PU leather cover 100gsm acid free paper in a bright ivory colour so you can use your favourite pen, pen or marker. 156 Numbered Pages 2 pages table of...

Reference: 230431-kitty

A5 notebook, turquoise M2.5 - kitty

Color turquoise:  A5 notice book in turquoise color. You can screw M2.5 glass cabochon on the book. Please note that the colors in the original may vary depending on the monitor! Notebook hardcover - PU leather cover 100gsm acid free paper in a bright ivory colour so you can use your favourite pen, pen or marker. 156 Numbered Pages 2 pages table of...

Reference: 230207

Triangle cabochon - 30mm

 1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. Size: each side is 30mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...

Reference: 230296-extra

M2.5 interchangeable pendant - extra long

Attention: this is a new extra long pendant.  Interchangeable jewelry gold plated pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5). This pendant is made of surgical stainless steel. I suggest to use with glass cabochon with 35-50 mm diameter. Hole size: 5mm Pendant size: 5mm x 26 mm The M2.5 thread is 4mm long....

Reference: 230401

Cecile M2.5 pendant

1 piece  Cecile pendant for one bead. I suggest to use with max. 15 mm bead. The pendant size is 20x43mm. The clasp can be used with max 3mm thick necklace. All part made of stainless steel ONE PENDANT! WITHOUT  BEADS!

Reference: 230346

M2.5 mojo pendant with necklace

1 piece M2.5 stainless steel mojo interchangeable pendant with 78cm stainless steel ball chain necklace The mojo pendant is 15mm x 12mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video   

Reference: 230272-5

5 x Dorry M2.5 pendant - 6mm hole

5 pieces Dorry 6 mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from  Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...

Reference: 230386

Felicitas bracelet - M2.5 wide

Interchangeable jewelry bracelet Adjustable stainless steel bracelet for beads with M2.5 screw nuts. Adjustable between 17-20cm. The M2.5 thread is 4mm long. The bracelet is 38 mm wide. The stainless steel is flexible, you can jently form it to set the size. WITHOUT GLASS BEADS!

Reference: 230360

M2.5 unicorn pendant with necklace

1 piece M2.5 stainless steel unicorn interchangeable pendant with 78 cm stainless steel ball chain necklace The unicorn pendant is 9 mm x 12 mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video   

Follow us on Facebook