Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 piece theater M2.5 pendant with 80 cm long ball chain necklace.
All parts made of stainless steel.
The pendant is 40x40x20mm.
You can install beads with maximum 20mm diameter.
Mirror polished.
WITHOUT BEAD!
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230344-cat-big
1 piece M2.5 stainless stee interchangeablel pendant with 78cm stainless steel ball chain necklace pendant styles and sizes without thread cat small: 10mm x 7mm cat big: 10mm x 14mm The M2.5 thread is 4mm long WITHOUT GLASS BEAD! PLEASE CHOICE THE PENDANT STYLE! video
Reference: 230210
lampwork tool - 1 piece heart steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230301
1 piece mini Bunny pendant bail with M2.5 thread without glassbead The pendant bail has beadcap with 8mm diameter. The hole size of the bail: 4mm x 7.5mm clasp size: 11mm X 13 mm x 8mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230207
1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. Size: each side is 30mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230373
1 piece M2.5 stainless steel buttefly interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 11mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230439
1 piece M2.5 stainless steel clover interchangeable pendant for small M2.5 beads Size of the clover 20x20mm. The clasp has 3mm hole. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230209
lampwork tool - 1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: each side is 50mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get...
Reference: 230283-p1
4 pieces unique wooden pens (walnut with marble effect) with M2.5 thread, blue pen refill, and black velvet bag. You will buy exactly the 5 pens on the photo. REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass...
Reference: 230200
Cabochon mandrel with M2.5mm thread. Mandrel has both ends M2.5 threads. (4mm and 6mm) thread size: M2.5 Mandrel is 20 cm long and it has 5mm diameter. Buy pendant: CLICK! Buy screw nuts 4mm: CLICK! Buy screw nuts 6mm: CLICK! Material: Surgical steel WITHOUT SCREW NUTS!
Reference: 230090-45
5mm stainless steel mesh necklace with interchangeable pendant for glass cabochon. thread size: M2.5 The necklace is made of stainless steel mesh, filled with black silicone. You can use this necklace with ringtops. The pendant compatible with Sunset Blvd jewelry parts. All Beach Buggy stainless steel bead pins can be put through the mesh so you can...
Reference: 230366
1 piece M2.5 stainless steel halloween interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 12mm x 11mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230359-10
10 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5 screw is 4mm long. The round plate has 15 mm diameter. Our items are local...
Reference: 230379
INTERCHANGEABLE RING WITH FLOWER BEADCAP! Please use it with max. 20-25mm cabochon. 1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. 1 piece stainless steel flower beadcap, the petals are hand polished. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make...
Reference: 230380
1 bag with 10 pieces brass M2.5 screw nut to glue. The screw nuts has 4.5 mm diameter and it is 6 mm long. The threaded hole inside is 4 mm long. This screw nuts is for artist without kiln. ATTENSION: THIS SCREW NUT TYPE IS ONLY FOR GLUE! PLEASE DON'T TRY TO MELT IT INTO GLASS! USAGE: I suggest to use 4 mm normal bead mandrel with bead release or 5 mm...
Reference: 230378-10pcs
INTERCHANGEABLE RING FOR SMALL BEADS! Please use it with max. 20-25mm cabochon. 10 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5...
Reference: 230278
Curved tube pendant clasp with M2.5 thread. You can use with with maximum 5mm leather cord. The length of the tube is 4cm. YOU CAN ORDER IT WITH 5MM LEATHER CORD NECKLACE TOO!
1 piece theater M2.5 pendant with 80 cm long ball chain necklace.
All parts made of stainless steel.
The pendant is 40x40x20mm.
You can install beads with maximum 20mm diameter.
Mirror polished.
WITHOUT BEAD!
