Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
3 pieces small button shanks with M2.5 thread.
The hole size of the loop is 3 mm, the M2.5 thread is 4 mm long.
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230283-mahogany
1 piece wooden pen with M2.5 thread, blue pen refill in the pen, and brown/black velvet bag OR 10 refills (choice from Menu). REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass beads with M2.5 screw nuts....
Reference: 230283-5-refill
5 pieces blue refill wooden pen PULL THE FILL FROM THE WOODEN PEN WITH A PLIERS!
Reference: 230425
1 piece M2.5 stainless steel frog king interchangeable pendant with 78 cm stainless steel ball chain necklace The frog pendant is 9 mm x 14 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230207
1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. Size: each side is 30mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230320
1 piece cabochon pendant with tube clasp and with M2.5 thread without glassbead The tube has 4mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230365
1 piece M2.5 stainless steel duck interchangeable pendant with 78 cm stainless steel ball chain necklace The muiscal note pendant is 6 mm x 13 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230356
Stainless steel half- Moon pendant with M2.5 thread without necklace This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread. The pendant has a 30 mm diamete and 10mm thickness. The clasp hole has 5 mm diameter. ATTENTION: WE CAN SHIP IT THIS ITEM FROM 19 NOVEMBER 2020! WITHOUT GLASS BEAD!
Reference: 24000-45-BL
Leather black necklace with M2.5 cabochon pendant. This necklace has 2 leather parts connected with 6mm beach buggy bead pin. This bead pin is installed with ball end bead with 2mm hole. You can install all beach buggy bead pin with this ball. Necklace will be delivered with interchangeable pendant. You can use this pendant with ringtops. The pendant is...
Reference: 230278
Curved tube pendant clasp with M2.5 thread. You can use with with maximum 5mm leather cord. The length of the tube is 4cm. YOU CAN ORDER IT WITH 5MM LEATHER CORD NECKLACE TOO!
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230335
1 piece dream catcher cabochon pendant and with M2.5 thread without glass bead the pendant has a beautiful laser cuted pattern. The round part has 35 mm, the leafs are 20mm long. Hand mirror polished This pendant is very light. The pendant is fit with 3mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long VIDEO: CLICK HERE!
Reference: 230292-acacia
1 pieces wood display with mirror for 4 pieces hairpin or pen. WITHOUT PENS AND HAIRPINS! Woodtypes: maple (middle brown) Cherry (light brown) light Cherry (very light brown) Acacia (little yellow tone) Size: Size: 12 cm x 16cm x 9 cm WE SHIP THIS ITEM ONLY IN EUROPE! ATTENTION: from 2 pieces we have to charge extra shipping fee! PLEASE NOTE THAT THE...
Reference: 230433
1 pair Vee earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This earring was designed by the great...
Reference: 230397
1 piece gingko pendant with 80 cm ballchain necklace. All part are made of stainless steel. The gingko without clasp and screw is 35x24mm. WITHOUT BEAD!
Reference: 230272
Dorry 6 mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video tutorial PDF...
Reference: 230337-5
5 pieces Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...
3 pieces small button shanks with M2.5 thread.
The hole size of the loop is 3 mm, the M2.5 thread is 4 mm long.
