Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 pair Vee earring.
Elegant style interchangeable earring jewelry to screw glass beads.
You can screw on the earrings a beads with M2.5 screw nuts.
The earring has 3.5 mm long M2.5 thread.
The size of the earring is 13x40mm (without screw)
Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
This earring was designed by the great glass artist Veerle Vandermeulen from Belgium www.veerle-v.be.
ATTENION: WITHOUT BEADS!
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230278
Curved tube pendant clasp with M2.5 thread. You can use with with maximum 5mm leather cord. The length of the tube is 4cm. YOU CAN ORDER IT WITH 5MM LEATHER CORD NECKLACE TOO!
Reference: 230423
1 piece life cabochon pendantand with M2.5 thread without glass cabochon. Surface is mirror polished. the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 7mm cord. The round stainless steel plate has 50mm diameter The M2.5 thread is 4mm long WITHOUT GLASS CABOCHON AND NECKLACE. Special price until end of...
Reference: 230320
1 piece cabochon pendant with tube clasp and with M2.5 thread without glassbead The tube has 4mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230018
Double interchangeable pendant for 2 glass cabochons. thread size: M2.5 You can use it with 2 ringtops. Pendant is compatible sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc. price includes: 2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x 18 mm beadpin 1 x...
Reference: 230432
oval earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring 17x35mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. ATTENION: WITHOUT BEADS!
Reference: 230436-gray
Teaman infuser with M2.5 screw nuts and M2.5 pin. ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF! The set contains: 1 piece stainless steel teapot 1 piece silicone body (gray, blue, green, pink) 1 piece of 4mm M2.5 screw nuts (closed) for head 1 piece of 6mm M2.5 screw nuts (closed) for ball 1...
Reference: 230220
1 pair of earring hooks for glass jewelry with M2.5 screw, with 18mm bead pins and Dorry end bead. thread size: M2.5 Other bead pin you can buy here: CLICK Dimensions: hook: 10 mm x 9 mm bead pin 18mm WITHOUT GLASS! WHEN YOU INSTALL THE GLASS ON THE EARRINGS, PLEASE HOLD THE CYLINDER PART NOT THE HOOK! PDF tutorial
Reference: 230392
1 piece elephant pendant with 80 cm ballchain necklace. All part are made of stainless steel. The elephant is 20x15mm. WITHOUT BEAD!
Reference: 230402
1 piece Duo Cecile pendant for one bead. I suggest to use with max. 15 mm beads. The pendant size is 20x43mm. The clasp can be used with max 3mm thick necklace. All part made of stainless steel ONE PENDANT! WITHOUT BEADS!
Reference: 230206
lampwork tool - 1 piece rectangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 45mmx30mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230346
1 piece M2.5 stainless steel mojo interchangeable pendant with 78cm stainless steel ball chain necklace The mojo pendant is 15mm x 12mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230337
1 piece Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...
Reference: 230397
1 piece gingko pendant with 80 cm ballchain necklace. All part are made of stainless steel. The gingko without clasp and screw is 35x24mm. WITHOUT BEAD!
Reference: 230386
Interchangeable jewelry bracelet Adjustable stainless steel bracelet for beads with M2.5 screw nuts. Adjustable between 17-20cm. The M2.5 thread is 4mm long. The bracelet is 38 mm wide. The stainless steel is flexible, you can jently form it to set the size. WITHOUT GLASS BEADS!
Reference: 230296-extra
Attention: this is a new extra long pendant. Interchangeable jewelry gold plated pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5). This pendant is made of surgical stainless steel. I suggest to use with glass cabochon with 35-50 mm diameter. Hole size: 5mm Pendant size: 5mm x 26 mm The M2.5 thread is 4mm long....
Reference: 230356
Stainless steel half- Moon pendant with M2.5 thread without necklace This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread. The pendant has a 30 mm diamete and 10mm thickness. The clasp hole has 5 mm diameter. ATTENTION: WE CAN SHIP IT THIS ITEM FROM 19 NOVEMBER 2020! WITHOUT GLASS BEAD!
1 pair Vee earring.
Elegant style interchangeable earring jewelry to screw glass beads.
You can screw on the earrings a beads with M2.5 screw nuts.
The earring has 3.5 mm long M2.5 thread.
The size of the earring is 13x40mm (without screw)
Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
This earring was designed by the great glass artist Veerle Vandermeulen from Belgium www.veerle-v.be.
ATTENION: WITHOUT BEADS!
