Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Ideal for fast, strong and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination.
Dry in 5 minutes, use after 24 hours.
WE SHIP THIS ITEM ONLY IN EU!
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230237-40mm
1 piece "Invisible Rings" with 2 screws. thread size: M1.1 The rings are made of Beach Buggy bead pin. To hold a screw in a flame you need a pin holder tool and 6mm bead pins. You can addjust a the ring. Please press it gently. The ring shape can be refine by ring pliers. PLEASE WATCH BOTH VIDEOS! Video Tutorial Video tutorial PDF tutorial...
Reference: 230242
1 piece surgical steel Twist pendant with 2 screws!. thread size: M1.1 You can use the beads as with invisible rings. You can adjust the pendant with hand. Pendant will be delivered with 2 screws, what you can melt into your glass beads. WITHOUT BEADS! I SUGGEST TO GLUE THE FINISHED BEADS! PLEASE WATCH BOTH VIDEOS! Video Tutorial Video tutorial PDF...
Reference: 230269-draht-fix
steel wire for Gabi stainless steel mesh necklace You can buy here fix wire with crimp beads or interchangeable wire for Gabi necklace . The fix wire is 27 cm long and you can cut it as you need. The interchangeable wire with screw have 20 cm length or 22 cm. Buy crimp tool: CLICK! WITHOUT NECKLACE! PLEASE SELECT THE WIRE TYPE! Video tutorial PDF...
Reference: 230381-coctail
2 pieces cocktail spoon. The M2.5 thread is 4 mm long. The spoon is 20 cm long without thread Material: high polished stainless steel. Without glass bead!
Reference: 230292-acacia
1 pieces wood display with mirror for 4 pieces hairpin or pen. WITHOUT PENS AND HAIRPINS! Woodtypes: maple (middle brown) Cherry (light brown) light Cherry (very light brown) Acacia (little yellow tone) Size: Size: 12 cm x 16cm x 9 cm WE SHIP THIS ITEM ONLY IN EUROPE! ATTENTION: from 2 pieces we have to charge extra shipping fee! PLEASE NOTE THAT THE...
Reference: 230007-6mm
Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. thread size: M1.1 The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm. You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...
Reference: 230283-mahogany
1 piece wooden pen with M2.5 thread, blue pen refill in the pen, and brown/black velvet bag OR 10 refills (choice from Menu). REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass beads with M2.5 screw nuts....
Reference: 230436-gray
Teaman infuser with M2.5 screw nuts and M2.5 pin. ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF! The set contains: 1 piece stainless steel teapot 1 piece silicone body (gray, blue, green, pink) 1 piece of 4mm M2.5 screw nuts (closed) for head 1 piece of 6mm M2.5 screw nuts (closed) for ball 1...
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230066-head
PIN HOLDER TOOL HEAD FOR M2.5 MANDREL (WITHOUTMANDREL) 1 piece pin holder tool head without mandrel. Install this head on M2.5 mandrel and use it for invisible rings. You can hold all Beach Buggy bead pin (M1.1) in the flame with this tool. Please screw strong the bead pin into the tool with pliers. The stainless steel bead pins get a dark patin in the...
Reference: 230283-5-refill
5 pieces blue refill wooden pen PULL THE FILL FROM THE WOODEN PEN WITH A PLIERS!
Reference: 230282
10 pieces of special stainless steel spacer beads. This beads shine like silver beads. Parameters: 6mm diameter, 2mm hole diameter Attention: These beads are spacer beads without thread.
Reference: 230348-white
4 pieces Svarovski Crystall for Petra Clips - Small (230304) PLEASE CHOICE COLOR! I suggest to glue them with epoxy glue! Crystal for Petra Clips big (230310) and Clips Pendant (230305) you can find here: CLICK!
Reference: 230347-white
4 pieces Svarovski crystal (white or black) for Petra Clips - Big Clips pendant PLEASE CHOICE COLOR! I suggest to glue them with epoxy glue! Crystal for Petra Clips small pendant you can find here: CLICK!
Reference: 230381-coffee
2 pieces coffee spoon. The M2.5 thread is 4 mm long. The spoon is 13 cm long without thread Material: high polished stainless steel. Without glass bead!
Ideal for fast, strong and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination.
Dry in 5 minutes, use after 24 hours.
WE SHIP THIS ITEM ONLY IN EU!
