I am on vacation until 07.01.2025!
Your orders will be processed starting on 8.01.1025!
I wish you a Merry Christmas and a Happy New Year!
Thank you for your patience! Regards, Judit
Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Teaman infuser with M2.5 screw nuts and M2.5 pin.
ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF!
The set contains:
1 piece stainless steel teapot
1 piece silicone body (gray, blue, green, pink)
1 piece of 4mm M2.5 screw nuts (closed) for head
1 piece of 6mm M2.5 screw nuts (closed) for ball
1 piece 8mm M2.5 screw
You should make 2 glass beads on the M2.5 thread.
The head should have a diameter of around 20mm, the other ball part should have a diameter of around 15mm.
Screw two glass bead together with the screw and press them into the silicone body.
Data Protection
Delivery
Terms and conditions
Surgical steel interchangeable pendant for double lampwork cabochon
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Video: CLICK HERE!
Reference: 230321
1 piece greece cabochon pendantand with M2.5 thread without glassbead The pendant has 4mm x10mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230309-5
Interchangeable jewelry: 5 pieces adjustable stainless steel memory wire for beads. Adjustable between 17-21cm. You will receive the 5 pieces bracelet bracelets. Each with 2 pieces stainless steel stopper beads (4mm diameter) and with 2 pieces end screw beads (5mm diameter to close the bracelet). Oval shape. You can buy in the shop one piece of this...
Reference: 230367
1 piece M2.5 stainless steel halloween interchangeable pendant with 78cm stainless steel ball chain necklace The fox pendant is 16mm x 11mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230360
1 piece M2.5 stainless steel unicorn interchangeable pendant with 78 cm stainless steel ball chain necklace The unicorn pendant is 9 mm x 12 mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230303
1 piece mini interchangeable jewelry pendant bail with M2.5 thread without glassbead The pendant bail has beadcap with 8mm diameter. The hole size of the bail: 4.5mm x 7mm clasp size: 11mm X 8 mm x 8mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230271
Zoe pliers Loop forming pliers. Maximum 0.7 mm wire. I SUGGEST TO USE WITH Zoe earrings!
Reference: 24000-45-BL
Leather black necklace with M2.5 cabochon pendant. This necklace has 2 leather parts connected with 6mm beach buggy bead pin. This bead pin is installed with ball end bead with 2mm hole. You can install all beach buggy bead pin with this ball. Necklace will be delivered with interchangeable pendant. You can use this pendant with ringtops. The pendant is...
Reference: 230300
1 piece Bunny pendant bail with M2.5 thread without glassbead pendant bail has a beadcap with 8mm diameter clasp size: 20 mm x 20 x 10 mm hole size: 6.8 mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230346
1 piece M2.5 stainless steel mojo interchangeable pendant with 78cm stainless steel ball chain necklace The mojo pendant is 15mm x 12mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230269-45-no-wires
GABI NECKLACE WITHOUT WIRES! 5 mm stainless steel mesh necklace This necklace have 3 parts. The middle part can be used for beads. You will receive 2 styles of middle part. One can be reopen by cube screw, other style is fix with crimp beads. The set do not include wires. You can extra order them. Open the balls on the end of the mesh and change the...
Reference: 230272
Dorry 6 mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video tutorial PDF...
Reference: 230269L-LB-45
GABI SYSTEM Gabi leather cord necklace for glass beads ATENTION: 20-22 cm space for beads 5 mm leather cord necklace (black, dark brown, light brown, dark grey) This necklace have 3 parts. The middle part can be used for beads. You will receive 2 styles of middle part. One can be reopen by cube screw, other style is fix with crimp beads. The set includes...
Reference: 230018
Double interchangeable pendant for 2 glass cabochons. thread size: M2.5 You can use it with 2 ringtops. Pendant is compatible sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc. price includes: 2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x 18 mm beadpin 1 x...
Reference: 230365
1 piece M2.5 stainless steel duck interchangeable pendant with 78 cm stainless steel ball chain necklace The muiscal note pendant is 6 mm x 13 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230269-45-fix-wires
GABI NECKLACE WITH 5 FIX WIRES! WITHOUT INTERCHANGEABLE WIRES! 5 mm stainless steel mesh necklace This necklace have 3 parts. The middle part can be used for beads. You will receive 2 styles of middle part. One can be reopen by cube screw, other style is fix with crimp beads. The set includes only 5 wires with crimp beads. Open the balls on the end of the...
Reference: 230338
5 pieces Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead with gold plating This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE:...
Teaman infuser with M2.5 screw nuts and M2.5 pin.
ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF!
The set contains:
1 piece stainless steel teapot
1 piece silicone body (gray, blue, green, pink)
1 piece of 4mm M2.5 screw nuts (closed) for head
1 piece of 6mm M2.5 screw nuts (closed) for ball
1 piece 8mm M2.5 screw
You should make 2 glass beads on the M2.5 thread.
The head should have a diameter of around 20mm, the other ball part should have a diameter of around 15mm.
Screw two glass bead together with the screw and press them into the silicone body.
