Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops.
thread size: M2.5
Length: 4mm, you can find in my shop 6mm long too.
Data Protection
Delivery
Terms and conditions
M2.5 Screw for Lampwork cabochons
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230066-head
PIN HOLDER TOOL HEAD FOR M2.5 MANDREL (WITHOUTMANDREL) 1 piece pin holder tool head without mandrel. Install this head on M2.5 mandrel and use it for invisible rings. You can hold all Beach Buggy bead pin (M1.1) in the flame with this tool. Please screw strong the bead pin into the tool with pliers. The stainless steel bead pins get a dark patin in the...
Reference: 230208
lampwork tool - 1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: each side is 40mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get...
Reference: 230418
1 piece round steel cabochon plate with M2.5mm cabochon mandrel. Size: 40 mm diameter You can create with this caboczon tops for pillbox. Buy pillbox: CLICK! WITHOUT MANDREL AND SCREW NUTS!
Reference: 230271
Crimp jewelry tool for Gabi necklace Special crimping tool to crimp the crimp beads and Crimp. This Crimp Tool is a special jewelry tool .Our version of the crimping tool is 12 cm long and with well-molded plastic handles for better grip and a spring for self-opening. I SUGGEST TO USE WITH GABI NECKLACE!
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230200
Cabochon mandrel with M2.5mm thread. Mandrel has both ends M2.5 threads. (4mm and 6mm) thread size: M2.5 Mandrel is 20 cm long and it has 5mm diameter. Buy pendant: CLICK! Buy screw nuts 4mm: CLICK! Buy screw nuts 6mm: CLICK! Material: Surgical steel WITHOUT SCREW NUTS!
Reference: 230256
10 pieces steel M2.5 screw 8 mm long. thread size: M2.5Length: 8mm, head diameter 3.5mm You should hold the the head with pliers until screw. From 50 pieces we offer 10% discount!From 100 pieces we offer 20% discount!
Reference: 230207
1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. Size: each side is 30mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230271
Zoe pliers Loop forming pliers. Maximum 0.7 mm wire. I SUGGEST TO USE WITH Zoe earrings!
Reference: 230201
lampwork tool - 1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 20mmx20mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230414
Made from stainless steel and has an overall length of approximately 26 cm. Approximately 6mm diameter hollow handle. The gripping end of the holder is designed like half a clothes pin that pinches the glass rod as it sits in a V shaped trough. For glass rod between 2-10mm.
Reference: 230209
lampwork tool - 1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: each side is 50mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get...
Reference: 230206
lampwork tool - 1 piece rectangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 45mmx30mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230204
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230210
lampwork tool - 1 piece heart steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops.
thread size: M2.5
Length: 4mm, you can find in my shop 6mm long too.
