Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 piece Ella pendant for two beads with M2.5 thread with 78 cm 1.6mm ball chain necklace.
All part made of stainless steel
WITHOUT BEAD!
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230204
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230357
1 piece M2.5 stainless steel snail interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 16mm x 11mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230090-45
5mm stainless steel mesh necklace with interchangeable pendant for glass cabochon. thread size: M2.5 The necklace is made of stainless steel mesh, filled with black silicone. You can use this necklace with ringtops. The pendant compatible with Sunset Blvd jewelry parts. All Beach Buggy stainless steel bead pins can be put through the mesh so you can...
Reference: 230427
1 piece M2.5 stainless steel shoe interchangeable pendant with 78 cm stainless steel ball chain necklace The shoe pendant is 9 mm x 14 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230359-10
10 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5 screw is 4mm long. The round plate has 15 mm diameter. Our items are local...
Reference: 230202
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. Size: 30mmx30mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant: CLICK! Buy...
Reference: 230432
oval earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring 17x35mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. ATTENION: WITHOUT BEADS!
Reference: 230297
1 piece Bunny pendant bail with M2.5 thread without glassbead clasp size: 20 mm x 20 x 10 mm hole size: 6.8 mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230283-mahogany
1 piece wooden pen with M2.5 thread, blue pen refill in the pen, and brown/black velvet bag OR 10 refills (choice from Menu). REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass beads with M2.5 screw nuts....
Reference: 230302
Emma earring. Simple style interchangeable earring jewelry with weld chain. You can screw one bead and glue one bead on this earring. The earring has 3 mm long M2.5 thread. Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
Reference: 230440
1 piece M2.5 stainless steel box clip for M2.5 beads (this is an item without glas fox!!!) Size of the staples 65x25mm. Material is stainless steel. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230369
1 piece M2.5 stainless steel hedgehog interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 8mm (without thread and clasp). The M2.5 thread is 4mm long Watch a video about the welding of hedgehog pendant: CLICK! WITHOUT GLASS BEAD! video
Reference: 230437
Milo earring. Elegant style interchangeable earring jewelry. The earring has 3 mm long M2.5 thread. The leaf shape size is 23x7mm. .Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
1 piece Ella pendant for two beads with M2.5 thread with 78 cm 1.6mm ball chain necklace.
All part made of stainless steel
WITHOUT BEAD!
