Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 piece Duo Cecile pendant for one bead.
I suggest to use with max. 15 mm beads.
The pendant size is 20x43mm.
The clasp can be used with max 3mm thick necklace.
All part made of stainless steel
ONE PENDANT! WITHOUT BEADS!
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230365
1 piece M2.5 stainless steel duck interchangeable pendant with 78 cm stainless steel ball chain necklace The muiscal note pendant is 6 mm x 13 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230373
1 piece M2.5 stainless steel buttefly interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 11mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230432-gold
Gold plated stainless steel oval earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring 17x35mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. ATTENION: WITHOUT...
Reference: 230433-gold
1 pair Vee gold plated stainless steel earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This...
Reference: 230381-coctail
2 pieces cocktail spoon. The M2.5 thread is 4 mm long. The spoon is 20 cm long without thread Material: high polished stainless steel. Without glass bead!
Reference: 230301
1 piece mini Bunny pendant bail with M2.5 thread without glassbead The pendant bail has beadcap with 8mm diameter. The hole size of the bail: 4mm x 7.5mm clasp size: 11mm X 13 mm x 8mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230200
Cabochon mandrel with M2.5mm thread. Mandrel has both ends M2.5 threads. (4mm and 6mm) thread size: M2.5 Mandrel is 20 cm long and it has 5mm diameter. Buy pendant: CLICK! Buy screw nuts 4mm: CLICK! Buy screw nuts 6mm: CLICK! Material: Surgical steel WITHOUT SCREW NUTS!
Reference: 230207
1 piece triangle steel cabochon plate with M2.5mm cabochon mandrel. Size: each side is 30mm long, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230426
1 piece M2.5 stainless steel crown interchangeable pendant with 78 cm stainless steel ball chain necklace The crown pendant is 9 mm x 11 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230380
1 bag with 10 pieces brass M2.5 screw nut to glue. The screw nuts has 4.5 mm diameter and it is 6 mm long. The threaded hole inside is 4 mm long. This screw nuts is for artist without kiln. ATTENSION: THIS SCREW NUT TYPE IS ONLY FOR GLUE! PLEASE DON'T TRY TO MELT IT INTO GLASS! USAGE: I suggest to use 4 mm normal bead mandrel with bead release or 5 mm...
Reference: 230378
INTERCHANGEABLE RING FOR SMALL BEADS! Please use it with max. 20-25mm cabochon. 1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5...
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230386
Interchangeable jewelry bracelet Adjustable stainless steel bracelet for beads with M2.5 screw nuts. Adjustable between 17-20cm. The M2.5 thread is 4mm long. The bracelet is 38 mm wide. The stainless steel is flexible, you can jently form it to set the size. WITHOUT GLASS BEADS!
Reference: 230256
10 pieces steel M2.5 screw 8 mm long. thread size: M2.5Length: 8mm, head diameter 3.5mm You should hold the the head with pliers until screw. From 50 pieces we offer 10% discount!From 100 pieces we offer 20% discount!
Reference: 230297
1 piece Bunny pendant bail with M2.5 thread without glassbead clasp size: 20 mm x 20 x 10 mm hole size: 6.8 mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230345
1 piece M2.5 stainless steel interchangeable pendant with 78cm stainless steel ball chain necklace ladybug size is 10mm x 9mm (without thread). The M2.5 thread is 4mm long. WITHOUT GLASS BEAD! video
1 piece Duo Cecile pendant for one bead.
I suggest to use with max. 15 mm beads.
The pendant size is 20x43mm.
The clasp can be used with max 3mm thick necklace.
All part made of stainless steel
ONE PENDANT! WITHOUT BEADS!
