Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 piece Milo pendant for one bead.
I suggest to use with max. 15 mm beads.
The leaf shape is 23x7mm.
The clasp can be used with max 3mm thick necklace.
All part made of stainless steel
ONE PENDANT! WITHOUT BEAD!
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230344-cat-big
1 piece M2.5 stainless stee interchangeablel pendant with 78cm stainless steel ball chain necklace pendant styles and sizes without thread cat small: 10mm x 7mm cat big: 10mm x 14mm The M2.5 thread is 4mm long WITHOUT GLASS BEAD! PLEASE CHOICE THE PENDANT STYLE! video
Reference: 230365
1 piece M2.5 stainless steel duck interchangeable pendant with 78 cm stainless steel ball chain necklace The muiscal note pendant is 6 mm x 13 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230356
Stainless steel half- Moon pendant with M2.5 thread without necklace This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread. The pendant has a 30 mm diamete and 10mm thickness. The clasp hole has 5 mm diameter. ATTENTION: WE CAN SHIP IT THIS ITEM FROM 19 NOVEMBER 2020! WITHOUT GLASS BEAD!
Reference: 230433-3-gold
3 pairs Vee gold plated stainless steel earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This...
Reference: 230296
Interchangeable jewelry pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5). This pendant is made of surgical stainless steel. It is hand polished. I suggest to use with glass cabochon with 30-45 mm diameter. Hole size: 5mm Pendant size: 5mm x 20 mm The M2.5 thread is 4mm long. Without glass and necklace!
Reference: 230326
1 piece mini flexi pendant bail with M2.5 thread without glass bead The cap has 8 mm diameter The M2.5 thread is 3 mm long For wire with maximum 4 mm diameter.
Reference: 230309-5
Interchangeable jewelry: 5 pieces adjustable stainless steel memory wire for beads. Adjustable between 17-21cm. You will receive the 5 pieces bracelet bracelets. Each with 2 pieces stainless steel stopper beads (4mm diameter) and with 2 pieces end screw beads (5mm diameter to close the bracelet). Oval shape. You can buy in the shop one piece of this...
Reference: 230303
1 piece mini interchangeable jewelry pendant bail with M2.5 thread without glassbead The pendant bail has beadcap with 8mm diameter. The hole size of the bail: 4.5mm x 7mm clasp size: 11mm X 8 mm x 8mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230381-coctail
2 pieces cocktail spoon. The M2.5 thread is 4 mm long. The spoon is 20 cm long without thread Material: high polished stainless steel. Without glass bead!
Reference: 230357
1 piece M2.5 stainless steel snail interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 16mm x 11mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230320
1 piece cabochon pendant with tube clasp and with M2.5 thread without glassbead The tube has 4mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230200
Cabochon mandrel with M2.5mm thread. Mandrel has both ends M2.5 threads. (4mm and 6mm) thread size: M2.5 Mandrel is 20 cm long and it has 5mm diameter. Buy pendant: CLICK! Buy screw nuts 4mm: CLICK! Buy screw nuts 6mm: CLICK! Material: Surgical steel WITHOUT SCREW NUTS!
Reference: 230436-gray
Teaman infuser with M2.5 screw nuts and M2.5 pin. ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF! The set contains: 1 piece stainless steel teapot 1 piece silicone body (gray, blue, green, pink) 1 piece of 4mm M2.5 screw nuts (closed) for head 1 piece of 6mm M2.5 screw nuts (closed) for ball 1...
Reference: 230367
1 piece M2.5 stainless steel halloween interchangeable pendant with 78cm stainless steel ball chain necklace The fox pendant is 16mm x 11mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230332-45cm
1 peices Annabelle necklace with 3 interchangeable pendant types The material of the necklace is silicone. You will receive these pendants with the necklace: Horizontal bead pendant (20mm) Vertical bead pendant (26mm) Cabochon pendant with M2.5 thread The beadpendants are closed with screw end beads. Please screw them with pliers or glue them. WITHOUT...
1 piece Milo pendant for one bead.
I suggest to use with max. 15 mm beads.
The leaf shape is 23x7mm.
The clasp can be used with max 3mm thick necklace.
All part made of stainless steel
ONE PENDANT! WITHOUT BEAD!
