Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 piece gingko pendant with 80 cm ballchain necklace.
All part are made of stainless steel.
The gingko without clasp and screw is 35x24mm.
WITHOUT BEAD!
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230297
1 piece Bunny pendant bail with M2.5 thread without glassbead clasp size: 20 mm x 20 x 10 mm hole size: 6.8 mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230220
1 pair of earring hooks for glass jewelry with M2.5 screw, with 18mm bead pins and Dorry end bead. thread size: M2.5 Other bead pin you can buy here: CLICK Dimensions: hook: 10 mm x 9 mm bead pin 18mm WITHOUT GLASS! WHEN YOU INSTALL THE GLASS ON THE EARRINGS, PLEASE HOLD THE CYLINDER PART NOT THE HOOK! PDF tutorial
Reference: 230425
1 piece M2.5 stainless steel frog king interchangeable pendant with 78 cm stainless steel ball chain necklace The frog pendant is 9 mm x 14 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230345
1 piece M2.5 stainless steel interchangeable pendant with 78cm stainless steel ball chain necklace ladybug size is 10mm x 9mm (without thread). The M2.5 thread is 4mm long. WITHOUT GLASS BEAD! video
Reference: 230401
1 piece Cecile pendant for one bead. I suggest to use with max. 15 mm bead. The pendant size is 20x43mm. The clasp can be used with max 3mm thick necklace. All part made of stainless steel ONE PENDANT! WITHOUT BEADS!
Reference: 230292-acacia
1 pieces wood display with mirror for 4 pieces hairpin or pen. WITHOUT PENS AND HAIRPINS! Woodtypes: maple (middle brown) Cherry (light brown) light Cherry (very light brown) Acacia (little yellow tone) Size: Size: 12 cm x 16cm x 9 cm WE SHIP THIS ITEM ONLY IN EUROPE! ATTENTION: from 2 pieces we have to charge extra shipping fee! PLEASE NOTE THAT THE...
Reference: 230321
1 piece greece cabochon pendantand with M2.5 thread without glassbead The pendant has 4mm x10mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230432-5
5 pairs oval earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring 17x35mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. ATTENION: WITHOUT BEADS!
Reference: 230359
NEW STYLE! 1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5 screw is 4mm long. The round plate has 15 mm diameter. Our items are...
Reference: 230433-5
5 pairs Vee earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This earring was designed by the...
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230418
1 piece round steel cabochon plate with M2.5mm cabochon mandrel. Size: 40 mm diameter You can create with this caboczon tops for pillbox. Buy pillbox: CLICK! WITHOUT MANDREL AND SCREW NUTS!
Reference: 230018
Double interchangeable pendant for 2 glass cabochons. thread size: M2.5 You can use it with 2 ringtops. Pendant is compatible sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc. price includes: 2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x 18 mm beadpin 1 x...
Reference: 230309-5
Interchangeable jewelry: 5 pieces adjustable stainless steel memory wire for beads. Adjustable between 17-21cm. You will receive the 5 pieces bracelet bracelets. Each with 2 pieces stainless steel stopper beads (4mm diameter) and with 2 pieces end screw beads (5mm diameter to close the bracelet). Oval shape. You can buy in the shop one piece of this...
Reference: 230272-5
5 pieces Dorry 6 mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...
Reference: 230278
Curved tube pendant clasp with M2.5 thread. You can use with with maximum 5mm leather cord. The length of the tube is 4cm. YOU CAN ORDER IT WITH 5MM LEATHER CORD NECKLACE TOO!
1 piece gingko pendant with 80 cm ballchain necklace.
All part are made of stainless steel.
The gingko without clasp and screw is 35x24mm.
WITHOUT BEAD!
