Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
oval earring.
Elegant style interchangeable earring jewelry to screw glass beads.
You can screw on the earrings a beads with M2.5 screw nuts.
The earring has 3.5 mm long M2.5 thread.
The size of the earring 17x35mm (without screw)
Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
ATTENION: WITHOUT BEADS!
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230272-5gold
5 pieces Dorry 6 mm hole pendant with M2.5 thread made of gold plated stainless steel This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY BLOWPIPE HERE: CLICK! video tutorial PDF tutorial
Reference: 230433-5
5 pairs Vee earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This earring was designed by the...
Reference: 230326
1 piece mini flexi pendant bail with M2.5 thread without glass bead The cap has 8 mm diameter The M2.5 thread is 3 mm long For wire with maximum 4 mm diameter.
Reference: 230391
3 pieces small button shanks with M2.5 thread. The hole size of the loop is 3 mm, the M2.5 thread is 4 mm long.
Reference: 230365
1 piece M2.5 stainless steel duck interchangeable pendant with 78 cm stainless steel ball chain necklace The muiscal note pendant is 6 mm x 13 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230206
lampwork tool - 1 piece rectangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 45mmx30mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230320
1 piece cabochon pendant with tube clasp and with M2.5 thread without glassbead The tube has 4mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230307
Interchangeable jewelry bracelet Adjustable stainless steel memory wire for two beads with M2.5 screw nuts. Adjustable between 17-21cm. Oval shape. WITHOUT GLASS BEADS!
Reference: 230373
1 piece M2.5 stainless steel buttefly interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 11mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230369
1 piece M2.5 stainless steel hedgehog interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 8mm (without thread and clasp). The M2.5 thread is 4mm long Watch a video about the welding of hedgehog pendant: CLICK! WITHOUT GLASS BEAD! video
Reference: 230389
1 piece theater M2.5 pendant with 80 cm long ball chain necklace. All parts made of stainless steel. The pendant is 40x40x20mm. You can install beads with maximum 20mm diameter. Mirror polished. WITHOUT BEAD!
Reference: 230220
1 pair of earring hooks for glass jewelry with M2.5 screw, with 18mm bead pins and Dorry end bead. thread size: M2.5 Other bead pin you can buy here: CLICK Dimensions: hook: 10 mm x 9 mm bead pin 18mm WITHOUT GLASS! WHEN YOU INSTALL THE GLASS ON THE EARRINGS, PLEASE HOLD THE CYLINDER PART NOT THE HOOK! PDF tutorial
Reference: 230018 -ball-3.5mm
Double interchangeable pendant for 2 glass cabochons (thread size is M2.5) This item can used with two ringtops. Pendant is compatible with sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc. price includes: 2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x 18 mm...
Reference: 230358
1 piece M2.5 stainless steel heart interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 15mm x 13mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230395
1 piece Ella pendant for two beads with M2.5 thread with 78 cm 1.6mm ball chain necklace. All part made of stainless steel WITHOUT BEAD!
oval earring.
Elegant style interchangeable earring jewelry to screw glass beads.
You can screw on the earrings a beads with M2.5 screw nuts.
The earring has 3.5 mm long M2.5 thread.
The size of the earring 17x35mm (without screw)
Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
ATTENION: WITHOUT BEADS!
