Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Teaman infuser with M2.5 screw nuts and M2.5 pin.
ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF!
The set contains:
1 piece stainless steel teapot
1 piece silicone body (gray, blue, green, pink)
1 piece of 4mm M2.5 screw nuts (closed) for head
1 piece of 6mm M2.5 screw nuts (closed) for ball
1 piece 8mm M2.5 screw
You should make 2 glass beads on the M2.5 thread.
The head should have a diameter of around 20mm, the other ball part should have a diameter of around 15mm.
Screw two glass bead together with the screw and press them into the silicone body.
Data Protection
Delivery
Terms and conditions
Surgical steel interchangeable pendant for double lampwork cabochon
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Video: CLICK HERE!
Reference: 230272-gold
1 piece Dorry 6 mm hole pendant with M2.5 thread made of gold plated stainless steel This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long ATTENTION: ON THE PHOTO ARE 2 PIECES PENDANT! BUY BLOWPIPE HERE: CLICK! video tutorial PDF...
Reference: 230324
1 piece flower cabochon pendantand with M2.5 thread without glassbead the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 4.5mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long ATTENTION: max. glass cabochon size is 30mm
Reference: 230369
1 piece M2.5 stainless steel hedgehog interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 8mm (without thread and clasp). The M2.5 thread is 4mm long Watch a video about the welding of hedgehog pendant: CLICK! WITHOUT GLASS BEAD! video
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230427
1 piece M2.5 stainless steel shoe interchangeable pendant with 78 cm stainless steel ball chain necklace The shoe pendant is 9 mm x 14 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230440
1 piece M2.5 stainless steel box clip for M2.5 beads (this is an item without glas fox!!!) Size of the staples 65x25mm. Material is stainless steel. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230283-5-refill
5 pieces blue refill wooden pen PULL THE FILL FROM THE WOODEN PEN WITH A PLIERS!
Reference: 230326
1 piece mini flexi pendant bail with M2.5 thread without glass bead The cap has 8 mm diameter The M2.5 thread is 3 mm long For wire with maximum 4 mm diameter.
Reference: 230237-40mm
1 piece "Invisible Rings" with 2 screws. thread size: M1.1 The rings are made of Beach Buggy bead pin. To hold a screw in a flame you need a pin holder tool and 6mm bead pins. You can addjust a the ring. Please press it gently. The ring shape can be refine by ring pliers. PLEASE WATCH BOTH VIDEOS! Video Tutorial Video tutorial PDF tutorial...
Reference: 230271
Zoe pliers Loop forming pliers. Maximum 0.7 mm wire. I SUGGEST TO USE WITH Zoe earrings!
Reference: 230269L-SP-LB-45
Gabi leather cord necklace for glass beads ATENTION: only 10 cm space for beads! 5 mm leather cord necklace (black, dark brown, light brown, dark grey) This necklace have 3 parts. The middle part can be used for beads. You will receive 2 styles of middle part. One can be reopen by cube screw, other style is fix with crimp beads. The set includes 1...
Reference: 230306
Adjustable stainless steel memory wire for 2 small M2.5 glass cabochon. Adjustable between 17-21cm. Oval shape. M2.5 threads are 4mm long. WITHOUT GLASS BEADS!
Reference: 230415
Samoa stainless steel box chain necklace. The box chain has 4mm diameter. The clasp has 5mm diamter. Length: 50 cm
Reference: 230283-mahogany
1 piece wooden pen with M2.5 thread, blue pen refill in the pen, and brown/black velvet bag OR 10 refills (choice from Menu). REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass beads with M2.5 screw nuts....
Reference: 230337-5
5 pieces Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...
Teaman infuser with M2.5 screw nuts and M2.5 pin.
ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF!
The set contains:
1 piece stainless steel teapot
1 piece silicone body (gray, blue, green, pink)
1 piece of 4mm M2.5 screw nuts (closed) for head
1 piece of 6mm M2.5 screw nuts (closed) for ball
1 piece 8mm M2.5 screw
You should make 2 glass beads on the M2.5 thread.
The head should have a diameter of around 20mm, the other ball part should have a diameter of around 15mm.
Screw two glass bead together with the screw and press them into the silicone body.
