Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Attention: this is a new extra long pendant.
Interchangeable jewelry gold plated pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5).
This pendant is made of surgical stainless steel.
I suggest to use with glass cabochon with 35-50 mm diameter.
Hole size: 5mm
Pendant size: 5mm x 26 mm
The M2.5 thread is 4mm long.
Without glass and necklace!
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230269L-SP-LB-45-no-wire
Gabi leather cord necklace for glass beads - ONLY LEATHER PART, WITHOUT WIRES ATENTION: only 10 cm space for beads! 5 mm leather cord necklace (black, dark brown, light brown, dark grey) PLEASE CHOICE LENGTH AND COLOR! Open the balls on the end of the mesh and change the middle part.Total necklace length: 45 or 50 cm. Buy more wire: CLICK!Buy crimp...
Reference: 230296
Interchangeable jewelry pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5). This pendant is made of surgical stainless steel. It is hand polished. I suggest to use with glass cabochon with 30-45 mm diameter. Hole size: 5mm Pendant size: 5mm x 20 mm The M2.5 thread is 4mm long. Without glass and necklace!
Reference: 230322
1 piece round cabochon pendantand with M2.5 thread without glassbead The pendant has tube clasp with 4mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230271
Crimp jewelry tool for Gabi necklace Special crimping tool to crimp the crimp beads and Crimp. This Crimp Tool is a special jewelry tool .Our version of the crimping tool is 12 cm long and with well-molded plastic handles for better grip and a spring for self-opening. I SUGGEST TO USE WITH GABI NECKLACE!
Reference: 230366
1 piece M2.5 stainless steel halloween interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 12mm x 11mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230346
1 piece M2.5 stainless steel mojo interchangeable pendant with 78cm stainless steel ball chain necklace The mojo pendant is 15mm x 12mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230264-36
Beadpin (not curved) with 2 screw nuts for invisible ring. thread size ist M1.1 PLEASE SELECT THE LENGTH OF THE BEAD PIN! You need a ring pliers to curve the beadpin! If you need other bead pin size, please buy the bead pin here: CLICK and screw nuts here: CLICK! Video tutorial Video tutorial PDF tutorial
Reference: 230368
1 piece M2.5 stainless steel flower bunny interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 16mm x 12mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230283-5-refill
5 pieces blue refill wooden pen PULL THE FILL FROM THE WOODEN PEN WITH A PLIERS!
Reference: 230427
1 piece M2.5 stainless steel shoe interchangeable pendant with 78 cm stainless steel ball chain necklace The shoe pendant is 9 mm x 14 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230423
1 piece life cabochon pendantand with M2.5 thread without glass cabochon. Surface is mirror polished. the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 7mm cord. The round stainless steel plate has 50mm diameter The M2.5 thread is 4mm long WITHOUT GLASS CABOCHON AND NECKLACE. Special price until end of...
Reference: 230008-40
Two pieces surgical steel - stainless steel bead pin for Beach Buggy system. The size given for the bead pin is always the net length – there is an additional 1.5 mm long thread on both sides so the total length is the given length plus 3 mm. thread size: M1.1 You can melt the glass directly on the rod so no end-piece is necessary. If you melt a glass on...
Reference: 230272-5gold
5 pieces Dorry 6 mm hole pendant with M2.5 thread made of gold plated stainless steel This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY BLOWPIPE HERE: CLICK! video tutorial PDF tutorial
Reference: 230326
1 piece mini flexi pendant bail with M2.5 thread without glass bead The cap has 8 mm diameter The M2.5 thread is 3 mm long For wire with maximum 4 mm diameter.
Reference: 230381-coffee
2 pieces coffee spoon. The M2.5 thread is 4 mm long. The spoon is 13 cm long without thread Material: high polished stainless steel. Without glass bead!
Reference: 230018
Double interchangeable pendant for 2 glass cabochons. thread size: M2.5 You can use it with 2 ringtops. Pendant is compatible sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc. price includes: 2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x 18 mm beadpin 1 x...
Attention: this is a new extra long pendant.
Interchangeable jewelry gold plated pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5).
This pendant is made of surgical stainless steel.
I suggest to use with glass cabochon with 35-50 mm diameter.
Hole size: 5mm
Pendant size: 5mm x 26 mm
The M2.5 thread is 4mm long.
Without glass and necklace!
