Emma earring.
Simple style interchangeable earring jewelry with weld chain.
You can screw one bead and glue one bead on this earring.
The earring has 3 mm long M2.5 thread.
Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230324
1 piece flower cabochon pendantand with M2.5 thread without glassbead the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 4.5mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long ATTENTION: max. glass cabochon size is 30mm
Reference: 230365
1 piece M2.5 stainless steel duck interchangeable pendant with 78 cm stainless steel ball chain necklace The muiscal note pendant is 6 mm x 13 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230089
Stainless steel mesh necklace with interchangeable pendant for glass cabochon. thread size: M2.5 You can use the pendant with glass cabochon and ringtops but it is compatible with all Sunset Blvd jewelry parts too. Steelmesh has 5mm diameter. Stainless steel magnet clasp. Length will be made as your request. PLEASE DO NOT WEAR THIS NECKLACE WITH KNITTED...
Reference: 230391
3 pieces small button shanks with M2.5 thread. The hole size of the loop is 3 mm, the M2.5 thread is 4 mm long.
Reference: 230283-mahogany
1 piece wooden pen with M2.5 thread, blue pen refill in the pen, and brown/black velvet bag OR 10 refills (choice from Menu). REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass beads with M2.5 screw nuts....
Reference: 230433-5
5 pairs Vee earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This earring was designed by the...
Reference: 230278
Curved tube pendant clasp with M2.5 thread. You can use with with maximum 5mm leather cord. The length of the tube is 4cm. YOU CAN ORDER IT WITH 5MM LEATHER CORD NECKLACE TOO!
Reference: 230397
1 piece gingko pendant with 80 cm ballchain necklace. All part are made of stainless steel. The gingko without clasp and screw is 35x24mm. WITHOUT BEAD!
Reference: 230380
1 bag with 10 pieces brass M2.5 screw nut to glue. The screw nuts has 4.5 mm diameter and it is 6 mm long. The threaded hole inside is 4 mm long. This screw nuts is for artist without kiln. ATTENSION: THIS SCREW NUT TYPE IS ONLY FOR GLUE! PLEASE DON'T TRY TO MELT IT INTO GLASS! USAGE: I suggest to use 4 mm normal bead mandrel with bead release or 5 mm...
Reference: 230355
Stainless steel Moon pendant with M2.5 thread without necklace This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread. The pendant has a 30 mm diamete and 10mm thickness. WITHOUT GLASS BEAD AND NECKLACE!
Reference: 230357
1 piece M2.5 stainless steel snail interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 16mm x 11mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230359-10
10 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5 screw is 4mm long. The round plate has 15 mm diameter. Our items are local...
Reference: 230433
1 pair Vee earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This earring was designed by the great...
Reference: 230272
Dorry 6 mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 8 mm x 5 mm hole size: 6 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video tutorial PDF...
Reference: 230204
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230424
1 piece round cabochon pendantand with M2.5 thread without glass cabochon. Surface is mirror polished. the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 7mm cord. The round stainless steel plate has 50mm diameter The M2.5 thread is 4mm long WITHOUT NECKLACE AND GLASS CABOCHON. Special price until end of...
Emma earring.
Simple style interchangeable earring jewelry with weld chain.
You can screw one bead and glue one bead on this earring.
The earring has 3 mm long M2.5 thread.
Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
