Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 pair of earring hooks for glass jewelry with M2.5 screw, with 18mm bead pins and Dorry end bead.
thread size: M2.5
Other bead pin you can buy here: CLICK
Dimensions: hook: 10 mm x 9 mm bead pin 18mm
WITHOUT GLASS!
WHEN YOU INSTALL THE GLASS ON THE EARRINGS, PLEASE HOLD THE CYLINDER PART NOT THE HOOK!
PDF tutorial |
Data Protection
Delivery
Terms and conditions
Surgical steel interchangeable earring for lampwork beads
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230432-5
5 pairs oval earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring 17x35mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. ATTENION: WITHOUT BEADS!
Reference: 230380
1 bag with 10 pieces brass M2.5 screw nut to glue. The screw nuts has 4.5 mm diameter and it is 6 mm long. The threaded hole inside is 4 mm long. This screw nuts is for artist without kiln. ATTENSION: THIS SCREW NUT TYPE IS ONLY FOR GLUE! PLEASE DON'T TRY TO MELT IT INTO GLASS! USAGE: I suggest to use 4 mm normal bead mandrel with bead release or 5 mm...
Reference: 230433-3-gold
3 pairs Vee gold plated stainless steel earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This...
Reference: 230376
1 pieces glass cabochon pendant mit M2.5 thread. The metal parts are mirror polished by hand. The blank has 21mm diameter. Tube - Clasp: Ø 4mm x 10mm M2.5 thread is 3mm long. NECKLACE IS JUST AN ILLUSTRATION!
Reference: 230203
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 35mmx35mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230296-extra
Attention: this is a new extra long pendant. Interchangeable jewelry gold plated pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5). This pendant is made of surgical stainless steel. I suggest to use with glass cabochon with 35-50 mm diameter. Hole size: 5mm Pendant size: 5mm x 26 mm The M2.5 thread is 4mm long....
Reference: 230379
INTERCHANGEABLE RING WITH FLOWER BEADCAP! Please use it with max. 20-25mm cabochon. 1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. 1 piece stainless steel flower beadcap, the petals are hand polished. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make...
Reference: 230433
1 pair Vee earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This earring was designed by the great...
Reference: 230296
Interchangeable jewelry pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5). This pendant is made of surgical stainless steel. It is hand polished. I suggest to use with glass cabochon with 30-45 mm diameter. Hole size: 5mm Pendant size: 5mm x 20 mm The M2.5 thread is 4mm long. Without glass and necklace!
Reference: 230335
1 piece dream catcher cabochon pendant and with M2.5 thread without glass bead the pendant has a beautiful laser cuted pattern. The round part has 35 mm, the leafs are 20mm long. Hand mirror polished This pendant is very light. The pendant is fit with 3mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long VIDEO: CLICK HERE!
Reference: 230418
1 piece round steel cabochon plate with M2.5mm cabochon mandrel. Size: 40 mm diameter You can create with this caboczon tops for pillbox. Buy pillbox: CLICK! WITHOUT MANDREL AND SCREW NUTS!
Reference: 230355
Stainless steel Moon pendant with M2.5 thread without necklace This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread. The pendant has a 30 mm diamete and 10mm thickness. WITHOUT GLASS BEAD AND NECKLACE!
Reference: 230338
Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead with gold plating This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK!...
Reference: 230326
1 piece mini flexi pendant bail with M2.5 thread without glass bead The cap has 8 mm diameter The M2.5 thread is 3 mm long For wire with maximum 4 mm diameter.
Reference: 230402
1 piece Duo Cecile pendant for one bead. I suggest to use with max. 15 mm beads. The pendant size is 20x43mm. The clasp can be used with max 3mm thick necklace. All part made of stainless steel ONE PENDANT! WITHOUT BEADS!
1 pair of earring hooks for glass jewelry with M2.5 screw, with 18mm bead pins and Dorry end bead.
thread size: M2.5
Other bead pin you can buy here: CLICK
Dimensions: hook: 10 mm x 9 mm bead pin 18mm
WITHOUT GLASS!
WHEN YOU INSTALL THE GLASS ON THE EARRINGS, PLEASE HOLD THE CYLINDER PART NOT THE HOOK!
| PDF tutorial |
