Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 piece Cecile pendant for one bead.
I suggest to use with max. 15 mm bead.
The pendant size is 20x43mm.
The clasp can be used with max 3mm thick necklace.
All part made of stainless steel
ONE PENDANT! WITHOUT BEADS!
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230355
Stainless steel Moon pendant with M2.5 thread without necklace This pendant is weld from 1 mm stainless steel wire with 4 long M2.5 thread. The pendant has a 30 mm diamete and 10mm thickness. WITHOUT GLASS BEAD AND NECKLACE!
Reference: 230283-p2
4 pieces unique wooden pens (walnut with marble effect) with M2.5 thread, blue pen refill, and black velvet bag. You will buy exactly the 5 pens on the photo. REFILL CAN BE CHANGED! The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass...
Reference: 230381-coctail
2 pieces cocktail spoon. The M2.5 thread is 4 mm long. The spoon is 20 cm long without thread Material: high polished stainless steel. Without glass bead!
Reference: 230220
1 pair of earring hooks for glass jewelry with M2.5 screw, with 18mm bead pins and Dorry end bead. thread size: M2.5 Other bead pin you can buy here: CLICK Dimensions: hook: 10 mm x 9 mm bead pin 18mm WITHOUT GLASS! WHEN YOU INSTALL THE GLASS ON THE EARRINGS, PLEASE HOLD THE CYLINDER PART NOT THE HOOK! PDF tutorial
Reference: 230392
1 piece elephant pendant with 80 cm ballchain necklace. All part are made of stainless steel. The elephant is 20x15mm. WITHOUT BEAD!
Reference: 230402
1 piece Duo Cecile pendant for one bead. I suggest to use with max. 15 mm beads. The pendant size is 20x43mm. The clasp can be used with max 3mm thick necklace. All part made of stainless steel ONE PENDANT! WITHOUT BEADS!
Reference: 230322
1 piece round cabochon pendantand with M2.5 thread without glassbead The pendant has tube clasp with 4mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230089
Stainless steel mesh necklace with interchangeable pendant for glass cabochon. thread size: M2.5 You can use the pendant with glass cabochon and ringtops but it is compatible with all Sunset Blvd jewelry parts too. Steelmesh has 5mm diameter. Stainless steel magnet clasp. Length will be made as your request. PLEASE DO NOT WEAR THIS NECKLACE WITH KNITTED...
Reference: 230379
INTERCHANGEABLE RING WITH FLOWER BEADCAP! Please use it with max. 20-25mm cabochon. 1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. 1 piece stainless steel flower beadcap, the petals are hand polished. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make...
Reference: 230432-5
5 pairs oval earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring 17x35mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. ATTENION: WITHOUT BEADS!
Reference: 230204
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230300
1 piece Bunny pendant bail with M2.5 thread without glassbead pendant bail has a beadcap with 8mm diameter clasp size: 20 mm x 20 x 10 mm hole size: 6.8 mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230367
1 piece M2.5 stainless steel halloween interchangeable pendant with 78cm stainless steel ball chain necklace The fox pendant is 16mm x 11mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230423
1 piece life cabochon pendantand with M2.5 thread without glass cabochon. Surface is mirror polished. the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 7mm cord. The round stainless steel plate has 50mm diameter The M2.5 thread is 4mm long WITHOUT GLASS CABOCHON AND NECKLACE. Special price until end of...
Reference: 230378-10pcs
INTERCHANGEABLE RING FOR SMALL BEADS! Please use it with max. 20-25mm cabochon. 10 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5...
Reference: 230202
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. Size: 30mmx30mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant: CLICK! Buy...
1 piece Cecile pendant for one bead.
I suggest to use with max. 15 mm bead.
The pendant size is 20x43mm.
The clasp can be used with max 3mm thick necklace.
All part made of stainless steel
ONE PENDANT! WITHOUT BEADS!
