Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Lola earring.
Elegant style interchangeable earring jewelry with weld chain.
You can screw one bead and glue one bead on this earring.
The earring has 3 mm long M2.5 thread.
Diameter of the cap is 8 mm.
.Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230391
3 pieces small button shanks with M2.5 thread. The hole size of the loop is 3 mm, the M2.5 thread is 4 mm long.
Reference: 230273
Dorry 8mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 10 mm x 5 mm hole size: 8 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video tutorial PDF...
Reference: 230018
Double interchangeable pendant for 2 glass cabochons. thread size: M2.5 You can use it with 2 ringtops. Pendant is compatible sunset blvd jewelry items too. You can use each zylinder separately.You can screw maximal 4 beadpins into the disc. price includes: 2 x disc (10mm x 2.5mm) with screw (M2.5 - 5mm long) 1 x 6 mm beadpin 1 x 18 mm beadpin 1 x...
Reference: 230297
1 piece Bunny pendant bail with M2.5 thread without glassbead clasp size: 20 mm x 20 x 10 mm hole size: 6.8 mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230202
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. Size: 30mmx30mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant: CLICK! Buy...
Reference: 230439
1 piece M2.5 stainless steel clover interchangeable pendant for small M2.5 beads Size of the clover 20x20mm. The clasp has 3mm hole. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230373
1 piece M2.5 stainless steel buttefly interchangeable pendant with 78cm stainless steel ball chain necklace The bunny pendant is 12mm x 11mm (without thread and clasp). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230433-3-gold
3 pairs Vee gold plated stainless steel earring. Elegant style interchangeable earring jewelry to screw glass beads. You can screw on the earrings a beads with M2.5 screw nuts. The earring has 3.5 mm long M2.5 thread. The size of the earring is 13x40mm (without screw) Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring. This...
Reference: 230402
1 piece Duo Cecile pendant for one bead. I suggest to use with max. 15 mm beads. The pendant size is 20x43mm. The clasp can be used with max 3mm thick necklace. All part made of stainless steel ONE PENDANT! WITHOUT BEADS!
Reference: 230366
1 piece M2.5 stainless steel halloween interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 12mm x 11mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230210
lampwork tool - 1 piece heart steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230306
Adjustable stainless steel memory wire for 2 small M2.5 glass cabochon. Adjustable between 17-21cm. Oval shape. M2.5 threads are 4mm long. WITHOUT GLASS BEADS!
Reference: 230430
1 piece M2.5 stainless steel dragonfly interchangeable pendant with 78 cm stainless steel ball chain necklace The dragonfly pendant is 25 mm x 30 mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230324
1 piece flower cabochon pendantand with M2.5 thread without glassbead the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 4.5mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long ATTENTION: max. glass cabochon size is 30mm
Reference: 230344-cat-big
1 piece M2.5 stainless stee interchangeablel pendant with 78cm stainless steel ball chain necklace pendant styles and sizes without thread cat small: 10mm x 7mm cat big: 10mm x 14mm The M2.5 thread is 4mm long WITHOUT GLASS BEAD! PLEASE CHOICE THE PENDANT STYLE! video
Lola earring.
Elegant style interchangeable earring jewelry with weld chain.
You can screw one bead and glue one bead on this earring.
The earring has 3 mm long M2.5 thread.
Diameter of the cap is 8 mm.
.Melt an M2.5 screw nuts into your lampwork beads and screw it on this earring.
