Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
1 piece elephant pendant with 80 cm ballchain necklace.
All part are made of stainless steel.
The elephant is 20x15mm.
WITHOUT BEAD!
Data Protection
Delivery
Terms and conditions
Stainless steel adjustable ring for glass cabochon with M2.5 screw nuts inside.
Beach Buggy is a interchangeable pendant, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230424
1 piece round cabochon pendantand with M2.5 thread without glass cabochon. Surface is mirror polished. the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 7mm cord. The round stainless steel plate has 50mm diameter The M2.5 thread is 4mm long WITHOUT NECKLACE AND GLASS CABOCHON. Special price until end of...
Reference: 230210
lampwork tool - 1 piece heart steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230343-bird-1
1 piece M2.5 stainless steel pendant with 78cm stainless steel ball chain necklace pendant styles and sizes without thread bird 1: 10mm x 12mm bird 2: 10mm x 12mm love birds: 10mm x 15mm owl: 10mm x 11mm, without thread The M2.5 thread is 4mm long WITHOUT GLASS BEAD! PLEASE CHOICE THE PENDANT STYLE! video
Reference: 230425
1 piece M2.5 stainless steel frog king interchangeable pendant with 78 cm stainless steel ball chain necklace The frog pendant is 9 mm x 14 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230380
1 bag with 10 pieces brass M2.5 screw nut to glue. The screw nuts has 4.5 mm diameter and it is 6 mm long. The threaded hole inside is 4 mm long. This screw nuts is for artist without kiln. ATTENSION: THIS SCREW NUT TYPE IS ONLY FOR GLUE! PLEASE DON'T TRY TO MELT IT INTO GLASS! USAGE: I suggest to use 4 mm normal bead mandrel with bead release or 5 mm...
Reference: 230321
1 piece greece cabochon pendantand with M2.5 thread without glassbead The pendant has 4mm x10mm hole The round stainless steel plate has 28mm diameter The M2.5 thread is 4mm long
Reference: 230346
1 piece M2.5 stainless steel mojo interchangeable pendant with 78cm stainless steel ball chain necklace The mojo pendant is 15mm x 12mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230378
INTERCHANGEABLE RING FOR SMALL BEADS! Please use it with max. 20-25mm cabochon. 1 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5...
Reference: 230337
1 piece Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video...
Reference: 230338
Dorry 4 mm hole slim pendant with M2.5 thread with hand polished stainless steel bead with gold plating This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 6 mm x 2 mm hole size: 4 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK!...
Reference: 230203
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 35mmx35mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230335
1 piece dream catcher cabochon pendant and with M2.5 thread without glass bead the pendant has a beautiful laser cuted pattern. The round part has 35 mm, the leafs are 20mm long. Hand mirror polished This pendant is very light. The pendant is fit with 3mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long VIDEO: CLICK HERE!
Reference: 230381-coffee
2 pieces coffee spoon. The M2.5 thread is 4 mm long. The spoon is 13 cm long without thread Material: high polished stainless steel. Without glass bead!
Reference: 230296-extra-gold
Interchangeable jewelry gold plated pendant for M2.5 screw interchangeable system for glass cabochon (thread size is M2.5). This pendant is made of surgical stainless steel, gold plated. I suggest to use with glass cabochon with 35-50 mm diameter. Hole size: 5mm Pendant size: 5mm x 26 mm The M2.5 thread is 4mm long. Without glass and necklace!
Reference: 230273
Dorry 8mm hole pendant with M2.5 thread with hand polished stainless steel bead This pendant is made by idea of the great Dorry Spoo glass artist from Luxemburg. spoodo.blogspot.com bead size: 10 mm x 5 mm hole size: 8 mm thread size: M2.5, 4 mm long WITHOUT GLASS AND NECKLACE! BUY NECKLACE HERE: CLICK! BUY BLOWPIPE HERE: CLICK! video tutorial PDF...
Reference: 230436-gray
Teaman infuser with M2.5 screw nuts and M2.5 pin. ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF! The set contains: 1 piece stainless steel teapot 1 piece silicone body (gray, blue, green, pink) 1 piece of 4mm M2.5 screw nuts (closed) for head 1 piece of 6mm M2.5 screw nuts (closed) for ball 1...
1 piece elephant pendant with 80 cm ballchain necklace.
All part are made of stainless steel.
The elephant is 20x15mm.
WITHOUT BEAD!
