Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-4mm-closed
1 bag with 10 pieces steel M2.5 (closed on the top) screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230000-6-mm-closed
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
Reference: 230233-6mm
1 piece screw nut for "Invisible Rings". You can melt on this screw a glass. Invisible Ring has M1.1mm thread, no M2.5 thread! This screw is fit with all bead pin of Beach Buggy. To hold a screw in a flame you need pin holder tool and 6mm bead pins. Size: 6mmx2mm. Thread 1.1mm Material: surgical steel WITHOUT PIN HOLDER TOOL AND BEADPIN! I SUGGEST TO GLUE...
Reference: 230000-6mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops.Length: 6mm, you can find in my shop 4mm long too.
4 pieces unique wooden pens (walnut with marble effect) with M2.5 thread, blue pen refill, and black velvet bag.
You will buy exactly the 5 pens on the photo.
REFILL CAN BE CHANGED!
The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass beads with M2.5 screw nuts.
Videotutorial
Tool: Mandrel
Screw: M2.5
Size:
Ball writing: 15cm is long (without M2.5 thread)
M2.5 thread: 3.5mm is long
The wood is treated with linseed oil.
Data Protection
Delivery
Terms and conditions
Beach Buggy is a interchangeable jewelry, screw-on system for lampwork bead jewelry. All metal elements are made from surgical steel (stainless steel), a material of many virtues. Surgical steel is one of the hardest kinds of steel, it does not get worn, does not get colorized and does not induce allergic reactions. It makes the elements long-lasting, they can be assembled and disassembled multiple times. The steel is so hard that you can even use pliers to gently hold and turn the elements without scratching them. You can hold the steel lampwork bead pins into the flame of a lampwork touch and melt glass onto it. All elements are threaded they can be connected by screwing. The lampwork bead pin and the various connector elements provide virtually unlimited possibilities to create fantastic jewelry. The diameter of the lampwork bead pins are 1.1 mm and the various silicon tubes and converters provide a tight fit for beads with holes of a diameter of 2-3 mm. The system is not recommended for holes with a diameter larger than 3 mm as the size of the end elements (4-5 mm) are too small for such beads. The recommended bore diameter is 1.5-2.5 mm.
Reference: 230426
1 piece M2.5 stainless steel crown interchangeable pendant with 78 cm stainless steel ball chain necklace The crown pendant is 9 mm x 11 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230346
1 piece M2.5 stainless steel mojo interchangeable pendant with 78cm stainless steel ball chain necklace The mojo pendant is 15mm x 12mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230335
1 piece dream catcher cabochon pendant and with M2.5 thread without glass bead the pendant has a beautiful laser cuted pattern. The round part has 35 mm, the leafs are 20mm long. Hand mirror polished This pendant is very light. The pendant is fit with 3mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long VIDEO: CLICK HERE!
Reference: 230359-10
10 piece stainless steel adjustable ring for glass cabochons with M2.5 screw nuts inside. The ring's inner diameter can be adjusted from 16 mm to 21 mm (it is the suggested maximum - although you can make it larger, we advise against it). The ring itself is 6 mm wide. The M2.5 screw is 4mm long. The round plate has 15 mm diameter. Our items are local...
Reference: 230324
1 piece flower cabochon pendantand with M2.5 thread without glassbead the pendant has a beautiful laser cutted pattern. This pendant is very light. The pendant is fit with 4.5mm cord. The round stainless steel plate has 35mm diameter The M2.5 thread is 4mm long ATTENTION: max. glass cabochon size is 30mm
Reference: 230392
1 piece elephant pendant with 80 cm ballchain necklace. All part are made of stainless steel. The elephant is 20x15mm. WITHOUT BEAD!
Reference: 230203
1 piece square steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 35mmx35mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right heading. Buy pendant:...
Reference: 230427
1 piece M2.5 stainless steel shoe interchangeable pendant with 78 cm stainless steel ball chain necklace The shoe pendant is 9 mm x 14 mm (without thread). Hole is 5mm. The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
Reference: 230210
lampwork tool - 1 piece heart steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 40mmx40mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230381-coffee
2 pieces coffee spoon. The M2.5 thread is 4 mm long. The spoon is 13 cm long without thread Material: high polished stainless steel. Without glass bead!
Reference: 230376
1 pieces glass cabochon pendant mit M2.5 thread. The metal parts are mirror polished by hand. The blank has 21mm diameter. Tube - Clasp: Ø 4mm x 10mm M2.5 thread is 3mm long. NECKLACE IS JUST AN ILLUSTRATION!
Reference: 230436-gray
Teaman infuser with M2.5 screw nuts and M2.5 pin. ATTENTION: HERE YOU GET THE TEA MAN WITHOUT HEAD AND BALL PART! YOU SHOULD MAKE THE 2 BEADS YOURSELF! The set contains: 1 piece stainless steel teapot 1 piece silicone body (gray, blue, green, pink) 1 piece of 4mm M2.5 screw nuts (closed) for head 1 piece of 6mm M2.5 screw nuts (closed) for ball 1...
Reference: 230206
lampwork tool - 1 piece rectangle steel cabochon plate with M2.5mm cabochon mandrel. thread size: M2.5 Size: 45mmx30mm, 3mm thickness Non-round cabochons generally have a definite “up” and “down” end so for my Beach Buggy stainless steel interchangeable system I have created a pendant that lets you to rotate the cabochon by 90 degrees to get the right...
Reference: 230297
1 piece Bunny pendant bail with M2.5 thread without glassbead clasp size: 20 mm x 20 x 10 mm hole size: 6.8 mm thread size: M2.5, 3 mm long WITHOUT GLASS PENDANT AND NECKLACE! BUY SCREW NUT HERE: CLICK! BUY MANDREL HERE: CLICK! video tutorial PDF tutorial
Reference: 230000-4mm
1 bag with 10 pieces steel M2.5 screw nut for sunset blvd interchangeable pendant, ring tops. thread size: M2.5 Length: 4mm, you can find in my shop 6mm long too.
Reference: 230358
1 piece M2.5 stainless steel heart interchangeable pendant with 78cm stainless steel ball chain necklace The snail pendant is 15mm x 13mm (without thread). The M2.5 thread is 4mm long WITHOUT GLASS BEAD! video
4 pieces unique wooden pens (walnut with marble effect) with M2.5 thread, blue pen refill, and black velvet bag.
You will buy exactly the 5 pens on the photo.
REFILL CAN BE CHANGED!
The ergonomic ballpoint pen was handmade from wood in Hungary. The ballpoint pen refills can be pulled out and exchanged with pliers. You can use it with your lampwork glass beads with M2.5 screw nuts.
Videotutorial
Tool: Mandrel
Screw: M2.5
Size:
Ball writing: 15cm is long (without M2.5 thread)
M2.5 thread: 3.5mm is long
The wood is treated with linseed oil.
